The overall structure of vacuum pump station is determined by the overall structure of the pump body.
The vertical structure has horizontal inlet and outlet, and it is convenient to assemble and connect pipelines. But the center of gravity of the pump is high, and its stability is poor at high speed, so this type of pump is mostly used for small pump.
The air inlet of the horizontal pump is on the top and the air outlet is on the bottom. Sometimes, in order to facilitate the installation and connection of vacuum system pipes, the exhaust port can be connected from the horizontal direction, that is, the inlet and exhaust directions are mutually perpendicular. At this time, the exhaust port can be opened from the left or right direction. In addition to connecting one end of the exhaust pipe, the other end is blocked or connected with the bypass valve. The pump has low center of gravity and good stability at high speed. Generally, large and medium-sized pumps use this structure.
The two rotor shafts of the pump are installed vertically with the horizontal plane. The assembly clearance of this structure is easy to control, the rotor assembly is convenient, and the pump occupies a small area
I know about the vacuum pump but did not know before that The vertical structure has a horizontal inlet and outlet. Also you can check https://bestwritingsclues.com/reviews/essaytyper-review/ to get thesis task help easily. I think this is a new thing in it that i did not know before. Thanks for explaining it fantastically.